Netgear FS752TPS FS752TS Setup Manual - Page 106
Switching > Multicast > Basic > IGMP Snooping Configuration, IGMP Snooping Configuration
View all Netgear FS752TPS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 106 highlights
FS700TS Smart Switch Software Administration Manual To configure Basic IGMP Snooping: 1. Click Switching > Multicast > Basic > IGMP Snooping Configuration. The Basic IGMP Snooping Configuration screen displays: Figure 4-20 The Basic IGMP Snooping Configuration screen contains the following fields: IGMP Snooping Configuration • IGMP Snooping Status - Select the IGMP Snooping status on the device. The possible field values are: - Enable - Enable IGMP Snooping on the device. - Disable - Disable IGMP Snooping on the device. Interface Settings • VLAN ID - Displays the VLAN ID. • Status - Select the IGMP Snooping status on the VLAN. The possible field values are: - Enable - Enable IGMP Snooping on the VLAN. - Disable - Disable IGMP Snooping on the VLAN. 2. Select the IGMP Snooping Status in the provided field. 3. Click APPLY to update the device. To configure IGMP Snooping on a VLAN: 1. Click Switching > Multicast > Basic > IGMP Snooping Configuration. The Basic IGMP Snooping Configuration screen displays. 2. Select the VLAN ID entry in the Interface Settings table. 4-30 v1.0, September 2007 Configuring Switching Settings