Netgear FS752TPS FS752TS Setup Manual - Page 41
Device View, Stacking, SNTP Server 2, APPLY, Delete, System > Device View
View all Netgear FS752TPS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
FS700TS Smart Switch Software Administration Manual • SNTP Server 2 - Enter the secondary SNTP server IP address. The Secondary SNTP server retrieves the system time if the Primary SNTP server times out. The following option is available: - Delete - Remove the currently configured SNTP Server 2. 2. Enter the SNTP Server 1 and SNTP Server 2 in the provided fields. 3. Click APPLY to update the system settings. To remove SNTP servers: 1. Check the Delete box for each SNTP server that is to be removed. 2. Click APPLY to update the system settings. Device View The Device View menu option displays the Device View screen, which provides a graphic representation of the device, including the port and LED statuses. To display the Device View screen: 1. Click System > Device View. The Device View screen displays: Figure 3-5 Stacking All stack members are accessed through a single IP address through which the stack is managed. Stacks are managed using: • Web-based Interface Managing System Settings 3-7 v1.0, September 2007