Netgear FS752TPS FS752TS Setup Manual - Page 88
LACP, To con LACP
View all Netgear FS752TPS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 88 highlights
FS700TS Smart Switch Software Administration Manual 4. Select the ports to be members of the LAG. 5. Click APPLY to update the device. 6. Click CURRENT MEMBERS. The Current Members window opens and displays the member ports included in the LAG: Figure 4-7 LACP Aggregated links can be set up manually or automatically established by enabling LACP on the relevant links. Aggregated ports can be linked into link-aggregation port-groups. Each group is comprised of ports with the same speed. The LACP screen contains fields for configuring LACP. To configure LACP: 1. Click Switching > LAG > Advanced > LACP Configuration. The LACP screen displays: Figure 4-8 The LACP screen contains the following field: • LACP System Priority - Enter the system priority value. The field range is 1-65535. The field default is 1. 2. Enter the LACP System Priority in the provided field. 4-12 v1.0, September 2007 Configuring Switching Settings