Netgear FS752TPS FS752TS Setup Manual - Page 111
Multicast Forward All
View all Netgear FS752TPS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 111 highlights
FS700TS Smart Switch Software Administration Manual • Interface Status - Select the interface status. The possible field values are: - Static - The interface is joined to the Multicast group statically. - Forbidden - The interface is forbidden to join the Multicast group. - Excluded - The interface is not included in the Multicast group. 2. Select the VLAN ID and Multicast Address from the lists in the provided fields. 3. Select the interface entry in the Multicast Group table. 4. Select the Interface Status from the list in the provided field in the first row. Note that you may not specify Dynamic. 5. Click APPLY to update the device. Multicast Forward All The Multicast Forward All screen contains fields for attaching ports or LAGs to a device that is attached to a neighboring Multicast router/switch. Once IGMP Snooping is enabled, Multicast packets are forwarded only to the appropriate port or VLAN. To define Multicast forward all settings: 1. Click Switching > Multicast > Advanced > Multicast Forward All. The Multicast Forward All screen displays: Figure 4-24 Configuring Switching Settings v1.0, September 2007 4-35