Netgear FS752TPS FS752TS Setup Manual - Page 136
Basic, 802.1X Configuration
View all Netgear FS752TPS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 136 highlights
FS700TS Smart Switch Software Administration Manual Basic The Port Authentication Basic menu contains the following option: • "802.1X Configuration" 802.1X Configuration The Basic 802.1X Configuration screen allows network managers to configure network authentication parameters. In addition, Guest VLANs are enabled from the Basic 802.1X Configuration screen. To define the 802.1X configuration: 1. Click Security > Port Authentication > Basic > 802.1X Configuration. The Basic 802.1X Configuration screen displays: Figure 6-5 The Basic 802.1X Configuration screen contains the following fields: • Port Based Authentication State - Select whether port-based authentication is enabled or disabled on the device. The possible field values are: - Disable - Disable port-based authentication on the device. - Enable - Enable port-based authentication on the device. • Authentication Method - Select the authentication method used for port authentication. The possible field values are: - RADIUS, None - Port authentication is first attempted through the RADIUS server. If the RADIUS server is inaccessible or not defined, then no authentication method (None) is used and the session is permitted. - RADIUS - Port authentication is through the RADIUS server. - None - No authentication method is used to authenticate the port. 6-8 Managing Security v1.0, September 2007