Netgear FS752TPS FS752TS Setup Manual - Page 81
Basic, LAG Configuration
View all Netgear FS752TPS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 81 highlights
FS700TS Smart Switch Software Administration Manual Basic The LAG Basic menu contains the following options: • "LAG Configuration" • "LAG Membership" LAG Configuration The Basic LAG Configuration screen contains fields for configuring LAG parameters. The system supports 8 LAGs, and each LAG can contain up to 8 ports. To define LAG parameters: 1. Click Switching > LAG > Basic > LAG Configuration. The Basic LAG Configuration screen displays: Figure 4-2 The Basic LAG Configuration screen contains the following fields: • Interface - Displays the LAG number. • Description - Enter a user-defined LAG description. • Status - Select the current link operation. The possible field values are: Configuring Switching Settings 4-5 v1.0, September 2007
FS700TS Smart Switch Software Administration Manual
Configuring Switching Settings
4-5
v1.0, September 2007
Basic
The LAG
Basic
menu contains the following options:
•
“LAG Configuration”
•
“LAG Membership”
LAG Configuration
The Basic LAG Configuration screen contains fields for configuring LAG parameters. The system
supports 8 LAGs, and each LAG can contain up to 8 ports.
To define LAG parameters:
1.
Click
Switching > LAG > Basic > LAG Configuration
. The Basic LAG Configuration
screen displays:
The Basic LAG Configuration screen contains the following fields:
•
Interface
– Displays the LAG number.
•
Description
– Enter a user-defined LAG description.
•
Status
– Select the current link operation. The possible field values are:
Figure 4-2