Netgear FS752TPS FS752TS Setup Manual - Page 182
Cable Fault Distance, Last Update, Cable Length, The test results are displayed.
View all Netgear FS752TPS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 182 highlights
FS700TS Smart Switch Software Administration Manual - No Cable - A cable is not connected to the port. - Open Cable - A cable is connected on only one side. - Short Cable - A short has occurred in the cable. - OK - The cable passed the test. • Cable Fault Distance - Displays the distance from the port where the cable error occurred. • Last Update - Displays the last time the port was tested. • Test - The test results are displayed. • Cable Length - Displays the approximate cable length. This test can only be performed when the port is up and operating at 100Mbps or 1 Gbps. 2. On the row containing the interface to be tested, click TEST to test the cable connected to the interface. 8-8 Maintenance v1.0, September 2007
FS700TS Smart Switch Software Administration Manual
8-8
Maintenance
v1.0, September 2007
–
No Cable – A cable is not connected to the port.
–
Open Cable – A cable is connected on only one side.
–
Short Cable – A short has occurred in the cable.
–
OK – The cable passed the test.
•
Cable Fault Distance
– Displays the distance from the port where the cable error
occurred.
•
Last Update
–
Displays the last time the port was tested.
•
Test
– The test results are displayed.
•
Cable Length
– Displays the approximate cable length. This test can only be performed
when the port is up and operating at 100Mbps or 1 Gbps.
2.
On the row containing the interface to be tested, click
TEST
to test the cable connected to the
interface.