Netgear FS752TPS FS752TS Setup Manual - Page 86
Speed, Duplex Mode, Auto Negotiation, Flow Control, APPLY, default. The possible field values are
View all Netgear FS752TPS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 86 highlights
FS700TS Smart Switch Software Administration Manual - Static - The LAG is configured manually. - LACP - The LAG is configured automatically. • Speed - Select the data transmission rate for the LAG. The LAG type determines what speed setting options are available. LAG speeds can only be configured when auto negotiation is disabled. The possible field values are: - 10M - The LAG is currently operating at 10 Mbps. - 100M - The LAG is currently operating at 100 Mbps. - 1000M - The LAG is currently operating at 1000 Mbps. • Duplex Mode - Select the duplex mode of the LAG. This field is configurable only when auto negotiation is disabled and the LAG speed is set to 10M or 100M. The possible field values are: - Half - The interface supports transmission between the device and the client in only one direction at a time. - Full - The interface supports transmission between the device and its link partner in both directions simultaneously. - Auto - The interface supports transmission between the device and the link partner based on the transmission mode of the link partner. • Auto Negotiation - Select the auto negotiation status of the LAG. Auto Negotiation is a protocol between two link partners that enables a port to advertise its transmission rate, duplex mode, and flow control abilities to its partner. Auto Negotiation is enabled by default. The possible field values are: - Enable - Enable auto negotiation. - Disable - Disable auto negotiation. • Flow Control - Select the flow control status of the LAG. Operates when the port is in full duplex mode. Flow Control is disabled by default. The possible field values are: - Enable - Enable flow control. - Disable - Disable flow control. 2. Select the interface. 3. Enter or modify the fields in the first row. 4. Click APPLY to update the device. 4-10 v1.0, September 2007 Configuring Switching Settings