Netgear FS752TPS FS752TS Setup Manual - Page 85
Switching > LAG > Advanced > LAG Configuration, Interface, Description, Status
View all Netgear FS752TPS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 85 highlights
FS700TS Smart Switch Software Administration Manual To define LAG parameters: 1. Click Switching > LAG > Advanced > LAG Configuration. The Advanced LAG Configuration screen displays: Figure 4-5 The Advanced LAG Configuration screen contains the following fields: • Interface - Displays the LAG number. • Description - Enter a user-defined LAG description. • Status - Select the current link operation. The possible field values are: - Up - The LAG is currently linked and forwarding traffic. - Down - The LAG is currently not linked. • Reactivate Suspended - Select the action to apply to a suspended LAG. The possible field values are: - Enable - Reactivate the suspended LAG. - Disable - Do not reactivate the suspended LAG. • Type - Displays the LAG Type. The possible field values are: Configuring Switching Settings 4-9 v1.0, September 2007