Netgear FS752TPS FS752TS Setup Manual - Page 97
STP, To con Port PVID parameters
View all Netgear FS752TPS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 97 highlights
FS700TS Smart Switch Software Administration Manual To configure Port PVID parameters: 1. Click Switching > VLAN > Advanced > Port PVID Configuration. The Port PVID Configuration screen displays: Figure 4-15 The Port PVID Configuration screen contains the following fields: • Interface - Displays the interface id (port number or LAG number) to which the PVID tag is assigned. • PVID - Enter the PVID value. The possible field range is 1-4093. 2. Select an interface. 3. Enter the PVID in the provided field in the first row. 4. Click APPLY to update the device. STP Spanning Tree Protocol (STP) provides tree topography for any arrangement of bridges. STP also provides a single path between end stations on a network, eliminating loops. Loops occur when alternate routes exist between hosts. Loops in an extended network can cause bridges to forward traffic indefinitely, resulting in increased traffic and reducing network efficiency. The STP menu contains the following options: • "Basic" • "Advanced" Configuring Switching Settings v1.0, September 2007 4-21