Symantec 11281411 Administration Guide - Page 68

68 Setting up the Alert Management System Configuring alert actions 5 To remove a net address that is no longer needed from the Current discovery broadcast addresses list, select the address, and then click Remove. When you remove a net address from this list, it doesn't disable that section of the network. Removing a net address only prevents AMS2 from searching that section of the network for AMS2 computers. 6 Click OK to save the list and return to the Alert Actions dialog box. Configuring the Message Box alert action The Message Box alert action displays a message box on the computer from which you configure the action. You can select whether the message box sounds a beep when it appears and whether the message box always appears on the screen until cleared. To configure the Message Box alert action 1 In the Symantec System Center console, right-click the server group, and then click All Tasks > AMS > Configure. 2 Select the alert for which you want to configure alert actions. 3 Click Configure. 4 Click Message Box, and then click Next. 5 Select a computer to execute the action, and then click Next. 6 Select whether you want an error beep and whether you want the dialog box to always appear on top until it is cleared. 7 Click Next. 8 Type an action name. The action name and the action computer name appear in the Alert Actions dialog box beside this action. 9 In the Message box, type any message text that you want to display and move available parameters that you want from Alert Parameters to the Message box. 10 Click Finish.