Yamaha MO6 Owner's Manual - Page 114
Cubase SX 3, SONAR 4, Digital Performer 4.52, Logic Pro 7 - usb driver
UPC - 086792837703
View all Yamaha MO6 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 114 highlights
Quick Guide Connecting the MO to external devices Using the MO with computer software 5 Press the [ENTER] button to execute the settings. 6 Press the [STORE] button to store the settings as the system settings of the Utility mode. CAUTION If you turn the power off without storing, the currently edited settings will be lost. CAUTION Never attempt to turn off the power while an "Executing..." or "Please keep power on" message is shown. Turning the power off in this state may cause the system to freeze and prevent normal startup the next time the power is turned on, as well as resulting in the loss of all user data. Start the software to be remote-controlled, 7 and make the MIDI settings and remote control settings. Set the Port setting for remote control on the software, referring to the illustration in step 4. Specific instructions for setting up your particular software follow. For instructions on how to start the software, refer to the documentation included with the software. ■ Cubase SX 3 1 Pull down the [Devices] menu and select [Device Setup] to call up the "Device Setup" window. 2 Click the [+] button and add "Mackie Control." 3 Select "Mackie Control" from the popup list. 4 When setting the Port to "4," for example, in step 4 of "Setting up for Remote Control," set the MIDI Input to "YAMAHA USB IN 0-4" and the MIDI Output to "YAMAHA USB OUT 0-4." n The functions of buttons on the Mackie Control are assigned to the buttons of the MO, with the exception of UserA and UserB (FootSw) which are not supported by the MO. ■ SONAR 4 1 Pull down the [Options] menu and select [MIDI Devices] to call up the "MIDI Devices" window. 2 When setting the Port to "4" for example in step 4 of "Setting up for Remote Control" add "YAMAHA USB IN 0-4" to the "Inputs" and add "YAMAHA USB OUT 0-4" to the "Outputs." 3 Pull down the [Options] menu and select [Control Surfaces] to call up the Control Surface window. 4 Click the "[+] button, select "Mackie Control," then set the Input Port to "YAMAHA USB IN 0-4" and the Output Port to "YAMAHA USB OUT 0-4" (for example, when setting the Port to "4" in step 4 of "Setting up for Remote Control"). ■ Digital Performer 4.52 1 Pull down the [Setup] menu and select [Control Surface Setup] to call up the "Control Surface" window. 2 Click the [+] button. 3 Select "Mackie Control" in the Driver section. 4 In the box for setting "Unit" and "MIDI," select "Mackie Control" in the "Unit" section and select the MIDI port in the "MIDI" section. ■ Logic Pro 7 When turning on the power of the MO before starting Logic: 1 Start Logic on the computer, then turn on the power of the MO. 2 Start Logic on the computer. Logic automatically recognizes the MO as Logic Control and performs the required settings. When starting Logic before turning on the power of the MO: 1 Start Logic on the computer, then turn the power to the MO on. If you have already set the software to be controlled to "Logic" in the Utility mode, you need not perform step 2 because Logic automatically recognizes the MO when this step is performed. 2 Set the software to be controlled to "Logic" in the Utility mode, then enter the Remote Control mode. Logic automatically recognizes the MO and performs the required settings. 114 Owner's Manual