Yamaha MO6 Owner's Manual - Page 206

Voice mode Performance mode Utility mode [SF4] OTHER AutoLoad Determines whether the Auto Load function is on or off. When this is on, the instrument will automatically load the specified files (from USB storage device) to User memory-whenever the power is turned on. For details about the Auto Load function, see page 102. Settings: on, off PowerOnMode This determines the default power-on mode (and memory bank)-letting you select which condition is automatically called up when you turn the power on. Settings: performance, voice (USR1), voice (PRE1), GM, last, master performance ....Performance Play mode (User Performance 001) voice (USR1)....Voice Play mode (User Voice "USR1: 001") voice (PRE1) ....Voice Play mode (Preset Voice "PRE 1: 001") GM Voice Play mode (GM Voices "GM: 001") last The mode and program number registered the last time by the procedure on page 210. master Master Play mode (User Master 001) CtrlReset (Controller Reset) Determines the status of the controllers (Modulation Wheel, Aftertouch, Foot Controller, Breath Controller, Knobs, etc.) when switching between voices. When this is set to "hold," the controllers are kept at the current setting. When this is set to "reset," the controllers are reset to the default states (below). Settings: reset, hold If you select "reset," the controllers will be reset to the following states/positions: Pitch Bend Center Modulation Wheel ......... Minimum Aftertouch Minimum Foot Controller Maximum Breath Controller .......... Maximum Foot Switch Off Expression Maximum Foot Volume Maximum Sustain Off [F2] OUTPUT L&RGain [F3] VOICE Set the output gain of the L/MONO and R jacks. Settings: 0dB, +6dB [VOICE] ➞ [UTILITY] ➞ [F3] These special voice-related settings are available only when entering the Utility mode from the Voice mode, letting you set parameters related to all the Voices. [SF1] MEQ (Master EQ) From this display you can apply five-band equalization to all Voices, raising or lowering the level of each frequency band (LOW, LOWMID, MID, HIGHMID, HIGH). The parameters are the same as in the Performance Common Edit. See page 172. Settings: For details about EQ, see page 141. [SF2] MEF (Master Effect) From this display you can set the Master Effect related parameters applied to all the Voices. The parameters are the same as in the Performance Common Edit. See page 172. [SF3] ARP CH (Arpeggio Channel) From this display you can set parameters related to output of the Arpeggio MIDI data in the Voice mode. OutputSwitch This enables or disables MIDI data output for the Arpeggio function. When this is set to "on," Arpeggio data is sent via MIDI-allowing you to send the Arpeggio data to an external sequencer or play back the Arpeggios on connected MIDI tone generators. Settings: on (enable), off (disable) TransmitCh (Transmit channel) Determines the MIDI channel through which Arpeggio playback data will be sent (when Output Switch above is on). Settings: 1 - 16 [SF4] CTL ASN (Controller Assign) Sets the parameters related to the controllers in the Voice mode. Details on each parameter are the same as in Performance Common Edit. See page 173. [F3] SEQ (Sequencer) [SONG] or [PATTERN] ➞ [UTILITY] ➞ [F3] These special song- and pattern-related settings are available only when entering the Utility mode from the Song or Pattern mode. [SF1] CLICK From this display you can set the parameters related to the click sound (metronome) that is used during recording or playback in the Song/Pattern mode. Mode Determines whether and when the metronome click will sound. Settings: off, rec, rec/play, all off The click will not sound. rec The click will sound during song/pattern recording only. rec/play The click will sound during song/pattern recording and playback. all The click will always sound. Beat Determines on which beats the metronome click will sound. Settings: 16 (16th notes), 08 (8th notes), 04 (quarter notes), 02 (half notes), 01 (whole notes) Volume Determines the click sound volume. Settings: 0 - 127 Type Determines the click sound type. Settings: 1 - 10 Song mode Pattern mode Mixing Voice mode Reference Utility mode File mode Master mode 206 Owner's Manual