Yamaha MO6 Owner's Manual - Page 177

Performance Job mode Performance Job mode [PERFORM] ➞ Performance selection ➞ [JOB] The Performance Job mode features several basic operations, such as Initialize and Copy. After setting parameters as required from the selected display, press the [ENTER] button to execute the Job. [F1] INIT (Initialize) This function lets you reset (initialize) all Performance parameters to their default settings. It also allows you to selectively initialize certain parameters, such as Common settings, settings for each Part, and so on-very useful when creating a completely new Performance from scratch. Type of parameter to be initialized All: All data in the Performance Common: Data in the Common Edit mode Part 1 - 4: Data of the Part Edit parameters of the corresponding internal Part n In order to select "Common" or "Part," the "ALL" box must be unchecked. [F2] RECALL (Edit Recall) If you are editing a Performance and select a different Performance without storing your edited one, all the edits you've made will be erased. If this happens, you can use Edit Recall to restore the Performance with your latest edits intact. [F3] COPY Source Performance You can copy Part parameter settings from any Performance to a particular Part of the Performance you are editing. This is useful if you are creating a Performance and wish to use some parameter settings from another Performance. Data type to be copied (Type) Part 1 - 4: Data of the Part Edit parameters of the corresponding internal Part Destination Performance (currently selected Performance) Copy procedure 1. Select the Source Performance. When "Current" is selected in the Source Performance, the Source Performance will be same as Destination Performance. If you wish to copy one Part to another Part in same Performance, select "Current." 2. Select the type of Source Performance (data that you want to copy). 3. Select which Parts will be replaced by the copied Part in the Destination Performance parameter. If you choose Arp (Arpeggio) or Effect, the Arpeggio data or Effect settings for the Voice assigned to the Source Part will be copied. 4. Press the [ENTER] button. [F4] BULK (Bulk Dump) This function lets you send all your edited parameter settings for the currently selected Performance to a computer or another MIDI instrument for data archiving. For details, see page 148. n In order to execute Bulk Dump, you'll need to set the correct MIDI Device Number, with the following operation: [UTILITY] → [F5] MIDI → [SF1] CH → DeviceNo. Performance Store mode [PERFORM] ➞ Performance selection ➞ [STORE] This function lets you store your edited Performance to User memory. For details, refer to page 66 in the Quick Guide section. Voice mode Performance mode Song mode Pattern mode Reference Mixing Voice mode Utility mode Master mode File mode Owner's Manual 177