Yamaha MO6 Owner's Manual - Page 116

Quick Guide Connecting the MO to external devices Using the MO with computer software ■ Data dial, [INC/YES] and [DEC/NO] buttons When the [DIAL] menu appears at the [SF4] button These controls can be used to set the value for the knob of the DAW controller, for the track/part selected by the cursor. The Knobs can also be used, but these help you make fine adjustments to the value that are difficult to make with the Knobs. When the menu does not appear at The buttons can be used to move the song position in the DAW. the [SF4] button n You can also move the song position by using the cursor [] buttons. ■ Knobs Assigns the functions of eight knobs on the DAW controller (01X, Mackie Control, and Logic Control) to the four Knobs on the MO. The Knobs let you control various parameters of each track (part). Pressing the [SF5] button changes which group of knobs is assigned (knobs 1 - 4 or knobs 5 - 8). The eight knobs on the DAW controller can also be used as switches. The switch function corresponding to the knob track (part) at the cursor position is also assigned automatically to the [ENTER] button, since the Knobs on the MO do not have a switch function. ■ Control sliders Assigns the functions of eight sliders on the DAW controller (01X, Mackie Control, and Logic Control) to the four Control sliders on the MO. The sliders let you control the volume of each track (part). Pressing the [SF5] button changes which group of faders (faders 1 - 4 or faders 5 - 8 on the DAW controller) is assigned to the Control sliders on the MO. ■ Control function buttons, [F1] - [F6] buttons, [SF1] - [SF5] buttons When the Mode is set to "General" These buttons are assigned to perform the same functions as the panel buttons on the 01X. The corresponding names of the 01X panel buttons are also indicated at the bottom of the display of the MO. When the Mode is set to "Logic" These buttons are assigned to perform the same functions as the panel buttons on the Logic Control. The corresponding names of the Logic Control panel buttons are also indicated at the bottom of the display of the MO. When the Mode is set to "Cubase," These buttons are assigned to perform the same functions as the panel buttons on the Mackie Control. The "SONAR," or "D.Perf" corresponding names of the Mackie Control panel buttons are also indicated at the bottom of the display of the MO. n Among the functions assigned to the [F1] - [F6] buttons and [SF1] - [SF5] buttons, the functions indicated with brackets (such as [DIAL]) are not related to the Mackie Control, Logic Control and 01X but are unique to the MO. ■ Cursor [] buttons By moving the cursor left/right, you can change the track or part to controlled by the data dial and [INC/YES]/[DEC/NO] buttons. Pressing the Cursor [>] button moves through the columns in succession (1, 2, 3, 4...). After 4, the cursor is hidden and wraps around to 1. Press the [SF5] KN 5 - 8 (KN 1 - 4) button to move the cursor up/down. ■ Cursor [ ] [ ] buttons When the Mode is set to "General" These buttons are assigned to the functions of the DISPLAY [▲][▼] buttons on the 01X. When the Mode is not set to "General" These buttons are assigned to the functions of the cursor up/down buttons on the Mackie Control and Logic Control. ■ [EXIT] button When the Mode is set to "General" When the Mode is not set to "General" The button is assigned to the function of the [PAGE SHIFT] button on the 01X. Not used. ■ Bank, Group [A] - [H], Number [1] - [16] buttons These buttons are assigned to perform the same functions as the buttons directly over the faders on the Yamaha 01X, Mackie Control and Logic Control. When the Mode is set to "General" Numbers [1] - [8] and [TRACK SELECT] buttons These buttons are assigned to the functions of the nine [SEL] buttons on the Yamaha 01X. Numbers [9] - [16] and [MUTE] buttons These buttons are assigned to the functions of the nine [ON] buttons on the 01X. When the Mode is not set to "General" [PRE1] - [-] buttons These buttons are assigned to the functions of the eight [REC/RDY] buttons on the Mackie Control and Logic Control. Group [A] - [H] buttons These buttons are assigned to the functions of the eight [SOLO] buttons on the Mackie Control and Logic Control. Numbers [1] - [8] buttons These buttons are assigned to the functions of the eight [MUTE] buttons on the Mackie Control and Logic Control. Numbers [9] - [16] buttons These buttons are assigned to the functions of the eight [SELECT] buttons on the Mackie Control and Logic Control. 116 Owner's Manual