Yamaha MO6 Owner's Manual - Page 126

Quick Guide Creating Your Original Program Set (Master mode) Creating Your Original Program Set (Master mode) Assigning Control Change numbers to the Knobs/Sliders for each Zone Here in the KN/CS display of the Master Edit mode, you can set how the Control Knobs and Sliders will affect each Zone. This lets you specify a separate MIDI Control Change number for each Knob and Slider. DAW REMOTE PAGE SELECT ASSIGN A PAN SEND PAN ASSIGN B REVERB ASSIGN 1 CHORUS ASSIGN 2 TEMPO ASSIGN TONE CUTOFF RESONANCE ATTACK RELEASE SWING GATE TIME VELOCITY UNIT MULTIPLY LOW LOW MID HIGH MID HIGH All indicators are turned off by setting the [MASTER] → [EDIT] → [COMMON] → [F2] OTHER → Knob/Slider parameter to "zone." ARP FX MEF EQ MASTER VOLUME ZONE 1 ZONE 2 ZONE 3 ZONE 4 You can determine which Control Change numbers are used for the Knobs and Sliders for each zone in the [MASTER] → [EDIT] → Zone selection → [F5] KN/CS display. In the example above, the Control Knobs for all Zones have been set to 10 (Pan), and the Sliders have been set to 11 (Expression). In this way, you can control the stereo position of each Zone with the appropriate Knob, and use the Sliders to adjust the relative volume balance among the Zones. 126 Owner's Manual