Yamaha MO6 Owner's Manual - Page 163

Voice Edit mode Normal Voice Edit Element Edit FCenterKey Determines the central note or pitch for the Key Follow effect on Amplitude EG. Depending on the EG Time Sensitivity parameter above, the further away from the Center Key the keys are played, the more the time of the Amplitude EG deviates from the norm. When the Center Key is played, the AEG behaves according to its actual settings. The amplitude change characteristics for other notes will vary in proportion to the EGTime settings. Settings: C -2 - G8 n You can also set the Center Key directly from the keyboard, by holding down the [INFORMATION] button and pressing the desired key. Level Sensitivity and Center Key When Level Sensitivity is set to 100 Large Amount of AEG level change + Small - EG Time Sensitivity and Center Key Positive value Negative value Lower range Faster speed +63 +30 Higher range -40 Slower speed Lower range Center key Higher range Center key [SF5] SCALE (Amplitude Scaling) Amplitude Scaling controls the output level (set in the [F4] AMP í [SF1] LVL /PAN display) according to the positions of the notes on the keyboard. You can divide the entire keyboard by four break points, and assign different offset values of amplitude to them respectively. Refer to the setting example on page 169. Settings: BREAK POINT 1 - 4: C-2 - G8 Settings: OFFSET 1 - 4: -128 - 0 - +127 n You can also set the Break Point directly from the Keyboard, by holding down the [INFORMATION] button and pressing the desired key. [F5] LFO (Low Frequency Oscillator) This display gives you a comprehensive set of controls over the LFO for each individual Element. The LFO can be used to create vibrato, wah, tremolo and other special effects, by applying it to the pitch, filter and amplitude parameters. Wave Determines the LFO waveform used to vary the sound. Settings: saw, tri, squ saw (sawtooth wave) tri (triangle wave) squ (square wave) Voice mode Performance mode Song mode Pattern mode Reference Mixing Voice mode Utility mode Speed KeyOnReset Determines the speed of the LFO waveform. The higher the value, the faster the speed. Settings: 0 - 63 Determines whether or not the LFO is reset each time a note is played. Settings: off, on Off On KeyOnDelay PMod (Pitch Modulation Depth) FMod (Filter Modulation Depth) AMod (Amplitude Modulation Depth) FadeInTime Time Time Key on Key on Determines the delay time between the moment you play a note on the keyboard and the moment the LFO comes into effect. A higher value results in a longer delay time. Settings: 0 - 127 Determines the amount (depth) by which the LFO waveform varies (modulates) the pitch of the sound. The higher the value, the greater the amount of pitch modulation. Settings: 0 - 127 Determines the amount (depth) by which the LFO waveform varies (modulates) the Filter Cutoff frequency. The higher the value, the greater the amount of filter modulation. Settings: 0 - 127 Determines the amount (depth) by which the LFO waveform varies (modulates) the amplitude or volume of the sound. The higher the value, the greater the amount of amplitude modulation. Settings: 0 - 127 Determines the amount of time for the LFO effect to fade in (after the KeyOnDelay time has elapsed). A higher value results in a slower fade-in. Settings: 0 - 127 Master mode File mode Owner's Manual 163