Yamaha MO6 Owner's Manual - Page 21

Power supply Turning the power on Make sure the volume settings of the MO and external devices are turned down to the minimum. Setting up and Playing MASTER VOLUME Turn the power on by pressing the [STANDBY/ON] switch on the MO rear panel, then turn the power on the amplifiers. Connecting MIDI devices or a Mixer Make sure that all volume settings are turned down all the way to the minimum. Then turn on the every device in your setup in the order of MIDI masters (controllers), MIDI slaves (receivers), then audio equipment (mixers, amplifiers, speakers, etc.). When powering down the setup, first turn down the volume of each audio device, then switch off each device in the reverse order (first audio devices, then MIDI). 1 2 3 POWER ON!! MIDI master MO (MIDI slave) Audio equipment (first mixer, then amplifier) Adjusting the sound and the display contrast Adjust the volume levels of the MO and the connected amplifier/speaker system. If the display is not easily visible, use the Contrast control to adjust for optimum visibility. Adjust the volume with the MASTER VOLUME slider. Adjust the display contrast with the Contrast control. SF1 F1 MASTER VOLUME Contrast control Now that you've set up the MO properly, you're ready to begin playing it. n When you are ready to turn off the MO, make sure to switch off the power of the external device (or lower its volume) before switching off the MO. Owner's Manual 21