Yamaha MO6 Owner's Manual - Page 186

Voice mode Performance mode Song Job mode [F3] EVENT (Event Job) n Before executing the Event Job, make sure that you specify the track and range (measure : beat : clock) to which the Job is applied. Please note that the track to be specified varies depending on the Job. 01: Shift Clock This Job shifts all data events in the specified range forward or backward by the specified number of clocks. TR (Track) 001 : 1 : 000 - 999 : 4 : 479 Determines the track (01 - 16, TMP, SCN, all) and range of measures/beats/clocks over which the Job is applied. Clock Determines the amount by which the data will be delayed or advanced in measures, beats, and clocks. Settings: 000:0:000 - 999:3:479 Direction Determines the direction in which the data will be shifted. ADVANCE moves the data toward the beginning of the sequence, while DELAY shifts the data toward the end of the sequence. Settings: Advance, Delay 02: Copy Event Source track and range in measures, beats, and clocks Destination track and the top (measure, beat, and clock) of the destination. This Job copies all data from a specified source range to a specified destination location. Execute this Job after setting: • Source track (01 - 16, TMP, SCN, all) • Source range (measure : beat : clock) • Destination track (01 - 16, TMP, SCN, all) • Destination range (measure : beat : clock) • Top measure of destination • Count (number of times data is to be copied) NumberOfTimes Determines the number of times the data is copied. Settings: 01 - 99 CAUTION When Copy Event is executed, any data already existing at the Destination location will be overwritten. 03: Erase Event This Job clears all specified events from the specified range, effectively producing a segment of silence. TR (Track) 001 : 1 : 000 - 999 : 4 : 479 Determines the track (01 - 16, TMP, SCN, all) and range of measures/beats/clocks over which the Job is applied. Event Type Determines the event type to be erased. All events are cleared when ALL is selected. Individual control change numbers can be specified when erasing control change events. Settings: When TR is set to 01 - 16: Note (Note events), PC (Program Change), PB (Pitch Bend), CC (Control Change)*, CAT (Channel Aftertouch), PAT (Polyphonic Aftertouch), EXC (System Exclusive), All (all events) When TR is set to "TMP" (Tempo): TMP (tempo) When TR is set to "SCN" (Scene): SceneMemory (Scene change information), TrackMute (Track mute setting change information) * You can also specify the CC No. (Control Change number). 04: Extract Event This Job moves all instances of specified event data from a specified range of a track to the same range in a different track. TR (Track) 001 : 1 : 000 - 999 : 4 : 479 Determines the track (01 - 16) and range of measures/beats/clocks over which the Job is applied. EventType Selects the event type to be extracted. Specific note and control change numbers can also be specified as required. Settings: Note, PC (Program Change), PB (Pitch Bend), CC (Control Change), CAT (Channel Aftertouch), PAT (Polyphonic Aftertouch), EXC (System Exclusive) → TR Determines the destination track (01 - 16). 05: Create Continuous Data This Job creates continuous pitch bend or control change data over the specified range. TR (Track) 001 : 1 : 000 - 999 : 4 : 479 Determines the track (01 - 16, TMP, all) and range of measures/beats/clocks over which the Job is applied. EventType Determines the event type to be created. Settings: PB (Pitch Bend), CC (Control Change)*, CAT (Channel Aftertouch), EXC (System Exclusive), TMP (Tempo) * You can also specify the CC No. (Control Change number). Data (Data Range) Determines the lower and upper limits for the data range to be created. The left value is the lower limit, and the right value is the upper limit. Settings: When Event Type is set to PB: -8192 - +8191 When Event Type is set to TMP: 1.0 - 300.0 When Event Type is set to other: 0 - 127 Clock Determines the number of clocks to be inserted between each created event. Settings: 001 - 999 Curve Determines the "curve" of the continuous data. Refer to the graph for approximate curve shapes. Settings: -16 - +16 Curve = +16 Curve = 0 (linear) Curve = -16 End point Start point This distance specified by Clock Song mode Pattern mode Mixing Voice mode Reference Utility mode File mode Master mode 186 Owner's Manual