Compaq Armada E700 Compaq Armada E700 Series Reference Guide - Page 99
Use a standard Torx T-8 screwdriver to remove and, with a standard Torx T-8 screw, as shown below.
View all Compaq Armada E700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 99 highlights
1 6. Remove the screw attaching the memory expansion compartment cover to the computer. s If the computer shipped with a preinstalled memory expansion board- s The memory expansion compartment cover is attached with a tamper-resistant Torx T-10 memory security screw. s Use the Torx T-10 screwdriver included with the computer to remove and reinsert this screw. s If the computer shipped with an empty memory expansion compartment- s The memory expansion compartment cover is attached with a standard Torx T-8 screw, as shown below. s Use a standard Torx T-8 screwdriver to remove and reinsert this screw. 2 7. Slide left, then lift and remove the memory expansion 3 compartment cover . Expanding Memory 13-3
Expanding Memory
13-3
6. Remove the screw
attaching the memory expansion
compartment cover to the computer.
■
If the computer shipped with a preinstalled memory
expansion board
—
■
The memory expansion compartment cover is
attached with a tamper-resistant Torx T-10 memory
security screw.
■
Use the Torx T-10 screwdriver included with the
computer to remove and reinsert this screw.
■
If the computer shipped with an empty memory
expansion compartment
—
■
The memory expansion compartment cover is attached
with a standard Torx T-8 screw, as shown below.
■
Use a standard Torx T-8 screwdriver to remove and
reinsert this screw.
7. Slide left, then lift and remove
the memory expansion
compartment cover
.