HP 1200 HP LaserJet 1200 Series - User Guide - Page 137
spring-loaded base. If the separation, pad is not straight or you see space
UPC - 637836445790
View all HP 1200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 137 highlights
5 5 Reach in through the opening, push the spring-loaded base down with one hand, and pull the separation pad up with the other hand. 6 With one hand, position the new separation pad in the slot of the previous separation pad (A). With the other hand, reach through the input tray opening, and push the 6 spring-loaded base down (B). Note The tab on the right is larger to help you position it correctly. 7 Snap both sides of the separation pad firmly into place. 7 CAUTION Make sure that the separation pad is straight and that there is no space between the separation pad and the spring-loaded base. If the separation pad is not straight or you see space on one side, remove the separation pad, make sure that the larger tab is on the 8 right, reinsert the separation pad, and snap both sides into place. 8 Reinsert the pickup roller, toner cartridge, and input trays. Plug the printer in to turn it back on. EN Changing the printer separation pad 135