HP StorageWorks MSA 2/8 HP StorageWorks Fabric OS Procedures V3.1.x/4.1.x User - Page 119
Displaying Information on Switch FRUs, Software CD.
View all HP StorageWorks MSA 2/8 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 119 highlights
Working With the Core Switch 2/64 switch:admin> slotshow ■ DISABLED The blade is powered on but disabled. ■ FAULTY The blade is faulty because an error was detected. ■ UNKNOWN The blade is inserted but it's state cannot be determined. Slot Blade Type ID Status 1 SW BLADE 2 ENABLED 2 UNKNOWN VACANT 3 SW BLADE 2 ENABLED 4 UNKNOWN VACANT 5 CP BLADE 1 ENABLED 6 CP BLADE 1 ENABLED 7 UNKNOWN VACANT 8 SW BLADE 2 ENABLED 9 SW BLADE 2 ENABLED 10 SW BLADE 2 ENABLED switch:admin> For complete information about switch FRUs, refer to the Core Switch 2/64 installation guide (the installation guide is also available on the v3.1.x or v4.1.x Software CD). Displaying Information on Switch FRUs To view switch FRU information for a switch: 1. Log into the switch as the admin user. 2. Enter the chassisshow command at the command line. This command displays the field replaceable unit (FRU) header content for each object in the chassis. This command returns information for each FRU including: Fabric OS Procedures Version 3.1.x/4.1.x User Guide 119