HP StorageWorks MSA 2/8 HP StorageWorks Fabric OS Procedures V3.1.x/4.1.x User - Page 63
Tracking Switch Changes, Enabling the Track Changes Feature
View all HP StorageWorks MSA 2/8 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
Basic Switch Management Tracking Switch Changes The Track Change feature allows you to keep a record of specific changes that may not be considered switch events, but may be useful. The output from the track changes feature is dumped to the error log for the switch. Use the errdump command or errshow command to view the error log. Items in the error log created from the Track changes feature are labeled TRACK. Trackable changes are: - Successful login - Unsuccessful login - Logout - Config file change from task - Track-changes on - Track-changes off An SNMP-TRAP mode can also be enabled. Refer to the trackchangeshelp command in the HP StorageWorks Fabric OS Version 3.1.x/4.1.x Reference Guide. Enabling the Track Changes Feature To enable the track changes feature: 1. Log into the switch as the admin user. 2. Enter the trackchangesset 1 command at the command line to enable the track changes feature. A prompt is displayed verifying that the track changes feature is on. Example: switch:admin> trackchangesset 1 Committing configuration...done. switch:admin> The output from the track changes feature is dumped to the error log for the switch. Use the errdump command or errshow command to view the error log. Items in the error log created from the Track changes feature are labeled TRACK. Fabric OS Procedures Version 3.1.x/4.1.x User Guide 63