HP StorageWorks MSA 2/8 HP StorageWorks Fabric OS Procedures V3.1.x/4.1.x User - Page 82
Displays a prompted firmwaredownload, Firmware Download
View all HP StorageWorks MSA 2/8 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
Firmware Download Example: Displays a "prompted" firmwaredownload switch:admin> firmwaredownload This command will upgrade both CPs in the switch. If you what to upgrade a single CP only, please use -s option. You can run firmwareDownloadStatus from a telnet session to get the status of this command. This command will cause the active CP to reset. This will cause disruption to devices attached to both switch 0 and switch 1 momentarily and will require that existing telnet sessions be restarted. Do you want to continue [Y]: y Server Name or IP Address: 192.168.174.91 User Name: johndoe File Name: pub/betarelease/list Password: FirmwareDownload has started on Active CP. It may take up to 10 minutes. Please use firmwareShow to see the firmware status. switch:admin> firmwareshow Local CP (Slot 6, CP1): Active Primary partition: v4.1 Secondary Partition: v4.1 Remote CP (Slot 5, CP0): Standby Primary partition: Secondary Partition: switch:admin> v4.1 v4.1 82 Fabric OS Procedures Version 3.1.x/4.1.x User Guide