HP StorageWorks MSA 2/8 HP StorageWorks Fabric OS Procedures V3.1.x/4.1.x User - Page 17
Enter, Enter the Ethernet IP Address when prompted. Click
View all HP StorageWorks MSA 2/8 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Initial Configuration - Ethernet Subnetmask - Hostname - Gateway IP Address 2. Log in to the switch as the admin user. 3. Enter the ipaddrset command at the command line. An interactive session is opened. 4. Choose the CP that you want to configure. Enter the value that corresponds to that logical region: - Enter 2 to configure CP 0 (slot 5). - Enter 3 to configure CP 1 (slot 6). 5. Enter the Ethernet IP Address when prompted. Click Enter. 6. Enter the Ethernet Subnetmask when prompted. Click Enter. 7. Enter the Hostname when prompted. Click Enter. 8. Enter the Gateway IP Address when prompted. Click Enter. 9. Enter the ippaddrshow command to verify the data you entered, and exit. 10. Enter the hafailover command to make the second CP active. 11. Repeat steps 1 through 9 to configure the second CP. 12. See "Configuring a Logical Switch IP Address for the Core Switch 2/64" to configure the logical switch IP addresses. Fabric OS Procedures Version 3.1.x/4.1.x User Guide 17