HP StorageWorks MSA 2/8 HP StorageWorks Fabric OS Procedures V3.1.x/4.1.x User - Page 41
Disabling a Port, Example, Example: SAN Switch 2/32
View all HP StorageWorks MSA 2/8 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Basic Switch Management Disabling a Port To disable a port: 1. Log into the switch as the admin user. 2. At the command line, enter the portdisable command using the following syntax: portdisable [slotnumber]/portnumber (Optional) Specify the slotnumber and portnumber that you want to disable. If the port is connected to another switch, the fabric may reconfigure. If the port is connected to one or more devices, these devices are no longer available to the fabric. Note: The slot number is only required for the Core Switch 2/64 switch. The following example is the command output from the portdisable command. Example: switch:admin> portdisable 4 The following examples show how to disable a port for SAN Switch 2/32 and a Core Switch 2/64. Example: SAN Switch 2/32 switch:admin> portdisable 4 switch:admin> portshow 4 portName: portFlags: 0x300082d7 portLbMod: 0x10 PRESENT ACTIVE E_PORT G_PORT U_PORT SEG MENTED CBL_LB LOGIN portType: 4.1 portState: 1 Online portPhys: 6 In_Sync portScn: 7 Segmented Flow control mode 0 portRegs: 0x81050000 portData: 0x11efc2d0 Fabric OS Procedures Version 3.1.x/4.1.x User Guide 41