HP StorageWorks MSA 2/8 HP StorageWorks Fabric OS Procedures V3.1.x/4.1.x User - Page 168
Setting the Error Save Level of a Switch, Displaying the Current Error Save Level Setting of a Switch
View all HP StorageWorks MSA 2/8 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 168 highlights
Diagnostics and Status If no operand is specified, this command changes the way the error log appears in subsequent sessions. By default, the errShow command displays error messages from both the active session and persistent logs from previous sessions. However, using the errclear command with no operands makes the following change: in future sessions, you would have to use the errShow -p command specifically to view persistent error messages. The following example shows how to clear the persistent error log on the Active CP. Example: switch:admin> errclear -p switch:admin> Setting the Error Save Level of a Switch To control types of messages that are saved in the persistent error log: 1. Log in to the switch as the admin user. 2. At the command line enter the errsavelvlset command. The following example shows how to enable saving of Warning, Error, Critical and Panic messages in the persistent error log. Example switch:admin> errsavelvlset 3 switch:admin> By default, all messages of type Panic and Critical are saved in the persistent log. Displaying the Current Error Save Level Setting of a Switch To find out the current value of the persistent error log save level for a given switch instance: 1. Log in to the switch as the admin user. 2. Enter the errsavelvlshow command at the command line. The following example shows how to display current error log save level. 168 Fabric OS Procedures Version 3.1.x/4.1.x User Guide