HP StorageWorks MSA 2/8 HP StorageWorks Fabric OS Procedures V3.1.x/4.1.x User - Page 53
Fabric Configuration Settings, Displaying the Fabric Configuration Settings
View all HP StorageWorks MSA 2/8 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
Basic Switch Management Fabric Configuration Settings It is important to have consistent system configuration settings since inconsistent parameters among switches in the same fabric can cause fabric segmentation. To troubleshoot a fabric segmentation issue, refer to "Restoring the System Configuration Settings" on page 55. The following parameters are included in the System Configuration Settings: ■ Fabric Parameters ■ Virtual Channel Settings ■ Zoning Operation Parameters ■ Rscn Transmission Mode ■ NS Pre-zoning Mode ■ Arbitrated Loop Parameters ■ System Services ■ Portlog Events Enable Displaying the Fabric Configuration Settings To display and check system configuration settings, perform the following procedure. 1. Log into the switch as the admin user. 2. Enter the configshow command at the command line. The system configuration settings appear. switch:admin> configshow RSCN.end-device.TransmissionMode:0 alpaList:1 boot.device:fei boot.file:/usr/switch/firmware boot.gateway.ipa:192.168.147.172 boot.ipa:192.168.147.172:ffffff00 boot.mac:10:00:00:60:69:80:04:22 boot.name:ter172 boot.server.ipa: Fabric OS Procedures Version 3.1.x/4.1.x User Guide 53