HP StorageWorks MSA 2/8 HP StorageWorks Fabric OS Procedures V3.1.x/4.1.x User - Page 129
Return, Example, ACL. Press
View all HP StorageWorks MSA 2/8 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 129 highlights
The SAN Management Application 2. At the command line enter the msconfigure command. The command becomes interactive. 3. At the select prompt enter 2 to add a member based on its Port/Node WWN. 4. At the prompt enter the WWN of the member you would like to add to the ACL. Press the Return key, and the main menu is displayed. 5. At the prompt enter 1 to verify the WWN you entered was added to the ACL. 6. Once you have verified that the WWN was added correctly, enter 0 at the prompt to end the session. 7. At the "Update the FLASH?" prompt enter Y. 8. Press Enter to update the flash and end the session. Example: switch:admin> msconfigure 0 Done 1 Display the access list 2 Add member based on its Port/Node WWN 3 Delete member based on its Port/Node WWN select : (0..3) [1] 2 Port/Node WWN (in hex): [00:00:00:00:00:00:00:00] *WWN is successfully added to the MS ACL. 0 Done 1 Display the access list 2 Add member based on its Port/Node WWN 3 Delete member based on its Port/Node WWN select : (0..3) [2] 1 > Fabric OS Procedures Version 3.1.x/4.1.x User Guide 129