Kyocera KM-6030 PRESCRIBE Commands Command Reference Manual Rev 4.8 - Page 127

FSET In selecting a font, the printer engages in a process of elimination. It first examines all fonts to match based on symbol set (the highest priority). All matches are next examined based on spacing. When the printer has reduced the matches to one font, it selects that font. Bitmap fonts have priority over scalable fonts. FSET enables the user to select a general class of font first, then specify characteristics (e.g. size and appearance) later. It is still preferable to specify all font parameters to ensure correct selection. The pitch and height parameters are measured in cpi and points respectively, regardless of the current unit setting (UNIT). Terminators following each parameter (P, H, V, S, B, and T) can use either lowercase or uppercase. The example below shows an FSET command sequence that selects the fixed-pitch (0p), 12-cpi (12h), 12-point (12v), upright-style (0s), normal stroke weight (0b), Letter Gothic (6T) font. This command sequence may be followed by a CSET command which selects the desired symbol set. Fixed or proportional Height Weight FSET 0p12h12v0s0b6T; Pitch Style Typeface 117