Kyocera KM-6030 PRESCRIBE Commands Command Reference Manual Rev 4.8 - Page 176

PRESCRIBE Command Reference MPTE - MP Tray Empty Format MPTE mode; Parameter mode: 0= disables the paper-empty message despite the MP tray is empty. 1= enables the paper-empty message when the MP tray is empty. Function When the MP tray is configured as the default paper source, the MPTE command enables or disables the paper-empty message which is shown when the MP tray becomes empty. Mode 1 (default) enables the paper-empty message to display when the MP tray is empty. When Mode is 0, this message is disabled despite the MP tray is empty and the other paper source(s) is not empty. (showing Ready, for example). It is not reset by the RES command, therefore, to change mode, the MPTE command should be used. File To configure the MP tray as the default paper source and disable the paper-empty message, command as follows: !R! FRPO R4, 0; MPTE 0; EXIT; 166