Kyocera KM-6030 PRESCRIBE Commands Command Reference Manual Rev 4.8 - Page 171

MCRO The following table shows the source of the PCL macros, the location in the printer, and the property value for the resource - important if resource protection mode is used. See also Resource Protection in the Technical Reference manual. Macro Downloaded Memory card Internal Location RAM Memory card ROM Property Temporary/Permanent Permanent Permanent The internal printer firmware manages the PCL macros, recognizing the source, location and property value of the macros. If the printer encounters PCL macros with the same macro ID, it will prioritize them in the following order: macros downloaded to RAM, macros residing on a memory card, and macros stored in the EPROM. Memory card and EPROM based PCL macros cannot be deleted. Downloaded PCL macros, available for all FS-series printers, may be removed using the PCL reset or delete commands: &f6X or &f8X. Downloaded macros may also be sent to specific host buffers of the printer interfaces. The memory card and ROM macros will be available on all interfaces. File !R! RES; FSET 1p12v0s3b24580T; MCRO SIGN %, string, length + 0.3; SPD .03; BOX %2, .3; MRP .15, .2; TEXT %1; MRP -.15, .35; ENDM; CALL SIGN, 'CHECK ALL SWITCHES AND INDICATORS ...', 3.9; CALL SIGN, 'BE SAFE; NOT SORRY', 2.1; PAGE; EXIT; Printout 161