Kyocera KM-6030 PRESCRIBE Commands Command Reference Manual Rev 4.8 - Page 146

PRESCRIBE Command Reference JOBO - JOB Output Format JOBO mode, 'job-id' or 'mailbox-id'[, password]; Parameters mode: 0 = normal 8 = virtual mailbox job-id (mode 0): job ID or page ID mailbox-id (mode 8): mailbox ID from 1 to 255, or alias password (mode 8 only): password for the mailbox Function The JOBO command retrieves a temporary or permanent job or the jobs saved in the virtual mailbox and prints with the finishing arrangements previously made. Mode 0 is used to retrieve and print a temporary or permanent job. The job to be retrieved may be specified by the job ID which is given internally by the printing system. It is also possible to specify the page ID if only a particular page is required to be printed. The page is automatically assigned and printed on a page when one of the ID barcode position parameters of 128 though 135 is specified for JOBS. A list of job names currently stored in the hard disk can be obtained by printing a job list (See JOBL on page 134). Settings such as the number of pages to print, whether to print barcode ID on the printed pages, etc., for the job to be retrieved by JOBO can be made by issuing JOBP followed by a JOBO (See JOBP on page 138). If the job name does not exist or the job is corrupted in hard disk, an error is messaged on the operator panel display as follows: Hard Disk Error 99 98 Meaning The job does not exist. The job is corrupted. Mode 8 retrieves jobs stacked on a virtual mailbox for printing. In mode 8, the ID number (or the alias, if the mailbox has one given) for the mailbox should be specified in place of job-name. The mailbox ID number should be 1 to 255. All jobs in the mailbox specified by its mailbox ID are printed at once. After printing is finished, all jobs in the mailbox are automatically deleted. 136