Kyocera KM-6030 PRESCRIBE Commands Command Reference Manual Rev 4.8 - Page 256

PRESCRIBE Command Reference RWER R - [Read/Write External Resource] Read data from external media Format RWER R, medium, data-type, 'partition-name'; Parameters medium: 0 = hard disk or RAM disk A = memory card E = EPROM data-type: 2 = Printable data 128 = API data (downloadable program) partition-name: Name of partition from which data is read, a maximum of 15 printable ASCII characters Function The RWER R command reads data from any external media whether it is a memory card, hard disk, EPROM, or RAM disk. Only data types 2 and 128 are allowed. Note that reading data of other data types, such as fonts and macros, does not require this command since the printing system automatically reads them at power up. If the same partition name exists on different external media, the priority with which data is read is as follows. High > Card Hard disk (RAM disk) Low EPROM The partition name may be a maximum of 15 printable ASCII characters (20H through 7EH); upper and lowercase letters are regarded as distinct. A partition name may not have leading spaces, and in the command, the partition name must be enclosed in single or double quotation marks. This command causes a page break. Reading data from a memory card: To read partition DataS001 from the memory card: !R! RWER R, A, 2, 'DataS001'; EXIT; 246