Kyocera KM-6030 PRESCRIBE Commands Command Reference Manual Rev 4.8 - Page 268

PRESCRIBE Command Reference RWRF W - [Read/Write Resource File] Write data to external device (API program) Format RWRF W, medium, "API", "program-type", prescribe-command-name, APIprogram-start-function-name, "file-name"; Parameters medium: 0 = hard disk A = memory card program-type: "PRE" prescribe command prescribe-command-name: ASCII text string up to 4 bytes API-program-start-function-name: ASCII text string up to 31 bytes Cannot be omitted. file-name: ASCII text string up to 15 bytes Automatically set by the system if omitted. Function The RWRF W command writes data to an external device such as the hard disk. The number of writable files, which is not limited, depends on the capacity of the external media. If the device runs out of free space during saving, the remaining data will be discarded. Duplicating a file name causes the system to rename the specified one and save data (without overwriting data). Example: Write and register the FILT prescribe command. !R! RWRF W , 0 , "API" , "PRE" , "FILT" , "apl_main";[Program Data]WRED; EXIT; 258