Kyocera KM-6030 PRESCRIBE Commands Command Reference Manual Rev 4.8 - Page 345

STAK STAK - select paper STAcKer Format STAK stacker; Parameter stacker: 1 = printing system's face-down output tray 2 = face-up output tray of the printing system or the option stacker 3 = face-down output tray of the option stacker 51 = face-up output tray of the option mailbox 52 = face-down output tray of the option mailbox 61 = face-down output tray of the option job separator (or the DF-610 subtray) 62 = face-up output tray of the DF-610 subtray Function The STAK command instructs the printing system to deliver pages to the corresponding output stack of the printing system or the option stacker. The selected tray remains in effect until changed by another STAK command. The default value is 1: the printing system's face-down tray. If an optional device such as a stacker, a document finisher, or a sorter is installed, the stacker value 2 instructs the printing system to deliver printed pages to its face-up tray; the value 3 delivers the pages to its face-down tray. The stacker values of 51, 52, and 61 are valid for certain copiers installed with the applicable option device. The STAK command should be placed at the top of a file or program. File !R! STAK 2; EXIT; PAGE 1 On printers with only one paper tray this file will be delivered face-down as usual, page 1 first. !R! PAGE; EXIT; PAGE 2 PAGE 2 next, and so on, stacking in the correct order. !R! PAGE; EXIT; PAGE 3 But on printers with two paper trays this file will be delivered to the face-up tray with the pages in reverse order, page 3 on top. !R! PAGE; EXIT; 335