Kyocera KM-6030 PRESCRIBE Commands Command Reference Manual Rev 4.8 - Page 160

PRESCRIBE Command Reference Function The LDFN C command defines bitmap characters for each character code for the downloaded font header already defined using LDFN F. Note that each character code defined must match the font number, symbol set (1- or 2-byte code), and other information of the font header already created. The bitmap data transferred at the end of this command is transferred under Kyocera's original BBN format. This is the transfer format used by the LDFC and LDKC commands. This command is recommended for use with downloading bitmap fonts. In other words, this command is intended as an equivalent for the old LDFC and LDKC commands. Use this command when creating a new bitmap font. LDFC, LDKC and CRKF will be deleted in the future. Units used in height, width, y-offset, x-offset and cell-width are dots of the resolution defined in the font header. The coordinate system used when defining bitmap fonts with this command is defined as follows. Note the sign of the offset value. Font Registration Coordinate System + direction Y Origin X + direction A command error will result and the command has no effect if any of the parameters are outside the given range. This command is ignored if even one parameter error occurs. 150