Kyocera KM-6030 PRESCRIBE Commands Command Reference Manual Rev 4.8 - Page 156

PRESCRIBE Command Reference LAPI - LoaD API Program Format LAPI Program type, PRESCRIBE command, function name; Parameters Program type: Type of the downloading program "PRE" PRESCRIBE command PRESCRIBE command name: Name of the PRESCRIBE command to be stored Alphanumeric string of 2 to 4 characters (Only in the case of "PRE") Function name: Name of the function that starts the user program (Only in the case of "PRE") Up to 31 characters Function The LAPI command downloads the API program. As described in the example below, add the string "WRED" to the end of the downloading data as a terminator. It is possible to add a string other than "WRED." It is because if the downloading program includes the string "WRED," this must be changed. To change the terminator, use the RWRF T command. When storing a new PRESCRIBE command, if the specified command name has already been stored, the sending data will be invalid. Data downloaded with the LAPI command will be deleted (invalid) upon the system restart. Example: !R! LAPI "PRE" , "XXXX" , "XXXXXXXX" ;[Program Data]WRED; EXIT; After "WRED" is changed to "TEST" !R! LAPI "PRE" , "XXXX" , "XXXXXXXX" ;[Program Data]TEST; EXIT; 146