Kyocera KM-6030 PRESCRIBE Commands Command Reference Manual Rev 4.8 - Page 173

MDAT fuser-mode 0 = High 1 = Middle 2 = Low 3 = Vellum duplex 0 = Enable 1 = Disable density 1 = Light 2 = Medium Light 3 = Normal 4 = Medium Heavy 5 = Heavy Function The MDAT command is used to customize the default attributes of a media type for optimization. The paper-weight attribute affects the printing system's transfer bias, fuser-mode affects the fuser temperature, and duplex determines whether the paper with that paper type is allowed for duplex printing or not. If the parameters paper-weight and fuser-mode are omitted, this command resets the three attributes back to their defaults. If all the parameter are omitted (MDAT;), all the attributes for the all media types are reset to the default. File To set the transparency paper type to the thick paper weight and the high fuser temperature mode, disabling the duplex printing, command: !R! MDAT 2, 1, 0, 1; EXIT; Related Command MTYP 163