Kyocera KM-6030 PRESCRIBE Commands Command Reference Manual Rev 4.8 - Page 83

DAP DAP - Draw to Absolute Position Format DAP x-coordinate, y-coordinate; Parameters x-coordinate: distance from the left margin y-coordinate: distance from the top margin Function The DAP command draws a line from the current cursor position to a position specified relative to the top and left margins. The thickness of the line is designated by the SPD (set pen diameter) command. The coordinates and line thickness are measured in the units designated by the UNIT command. The coordinates may be positive or negative. Negative coordinates cause the line to extend outside the margin. The DAP command is ignored in the path mode graphics. File !R! RES; UNIT C; CMNT Tree Diagram; STM 8; SLM 8; MAP 0, 0; DAP 2, 0.5; MAP 0, 1; DAP 2, 0.5; MAP 0, 1; DAP 2, 1.5; MAP 0, 2; DAP 2, 1.5; MAP 0, 2; DAP 2, 2.5; MAP 0, 3; DAP 2, 2.5; MAP 2, 0.5; DAP 4, 1; MAP 2, 1.5; DAP 4, 1; MAP 2, 1.5; DAP 4, 2; MAP 2, 2.5; DAP 4, 2; MAP 4, 1; DAP 6, 1.5; MAP 4, 2; DAP 6, 1.5; PAGE; EXIT; 73