Kyocera KM-6030 PRESCRIBE Commands Command Reference Manual Rev 4.8 - Page 271

RWRF W RWRF W - [Read/Write Resource File] Write data to external device (macro) Format RWRF W, medium, "MCR", macro-type, "macro-ID or macro-name", "filename"; Parameters medium: 0 = hard disk A = memory card macro-type: "PRE" prescribe macro "PCL" PCL macro macro-ID or macro-name: macro-ID for PCL macro (0 to 32767) macro-name for prescribe macro (ASCII text string up to 4 bytes) file-name file-name: ASCII text string up to 15 bytes Automatically set by the system if omitted. Function The RWRF W command writes data to an external device such as the hard disk. The number of writable files, which is not limited, depends on the capacity of the external media. If the device runs out of free space during saving, the remaining data will be discarded. Duplicating a file name causes the system to rename the specified one and save data (without overwriting data). Example: Write and register prescribe macro "TEST". !R! RWRF W,0, "MCR", "PRE", "TEST", "test_macro"; %[Macro Data] WRED; EXIT; Write and register the PCL macro (macro ID: 1111). !R! RWRF W,0, "MCR", "PCL", 1111, "test_macro"; [Macro Data] WRED; EXIT; 261