Kyocera KM-6030 PRESCRIBE Commands Command Reference Manual Rev 4.8 - Page 356

PRESCRIBE Command Reference SULP - Set UnderLine Parameters Format SULP distance, thickness; Parameters distance: distance below the baseline thickness: thickness of the underline Function The SULP command sets the thickness of any subsequent underlining as well as the distance below the baseline, in the unit value designated by the UNIT command. The distance parameter is limited only by the size of the page. Negative values can be used to obtain overlines. The minimum underline thickness is one dot. The maximum underline thickness is 127 dots. The default values include: • Distance below baseline: 7 dots • Thickness of underline: 4 dots • One dot equals approximately 0.0083 cm or 0.0033 inches. The SULP command does not affect the underline character (_), which is an independent character with ASCII code 95 (hex 5F). If your word-processing software writes underlines by backing up and printing the underline character instead of using the printing system's automatic underline feature, the SULP command will control only underlines printed by the U-option in PRESCRIBE commands such as TEXT. File !R! RES; UNIT C; SLS 0.8; SFNT 'Helvetica-Nr', 12; TEXT 'Default paramaters', E, U; TEXT ', ', E; SULP .2, .1; TEXT 'heavier underlining', N, U; TEXT 'and even', E; SULP -.32, .04; TEXT 'OVERLINING', E, U; TEXT '!'; PAGE; EXIT; 346