Kyocera KM-6030 PRESCRIBE Commands Command Reference Manual Rev 4.8 - Page 340

PRESCRIBE Command Reference SRO - Set Raster Options Format SRO presentation-mode [, width, height]; Parameters presentation-mode: 0 = physical raster direction 1 = logical page direction width: width of raster area in dot; min. 1 to max. 4200 dots height: height of raster area in dot; min. 1 to max. 4200 dots Function The SRO command specifies the presentation mode which defines the orientation of the raster image. If the presentation-mode is 0 (default), the printing system creates the raster image along the width of the physical page regardless of the current page orientation. With the presentation-mode 1, however, the raster graphics prints in the orientation of the logical page. Presentation modes 0 and 1 are depicted in the next page. The width and height options define the size of the raster area which has the current position as its left-top corner of the area. These options are measured in the dot unit regardless of the current designation of the UNIT command. Raster data extending beyond the border along the width of the raster area is clipped in the increment of dot. After a RVRD command sequence finishes, the current position is moved down by 1/300 inch. 330