Kyocera KM-6030 PRESCRIBE Commands Command Reference Manual Rev 4.8 - Page 129

FTMD FTMD - bitmap FonT MoDe Format FTMD value; Parameter value: an integer from 0 to 15 Function The FTMD command determines which attributes will be changed automatically when a bitmap font (simulated based on scalable fonts) is selected by the FONT, ALTF, or RPF command. The attributes and values appear as follows: Horizontal motion index (character spacing) 1 Vertical motion index (line spacing) 2 Fixed or proportional spacing 3 Portrait or landscape orientation 4 The values 1, 2, 4, and 8 change a single font attribute using the FTMD command. When the FTMD command is executed, the printer adjusts the designated attributes of the current font. Later, if the current font is changed by a FONT, ALTF, or RPF command, the printer automatically changes the designated attributes to the values of the new font. The default value of the FTMD command depends on the emulation mode. The printer does not automatically change any attributes not designated by the FTMD command. If necessary, these attributes must be adjusted by other commands: SCS or SCPI for the character spacing; SLS or SLPI for the line spacing; and SPO for the page orientation. The FTMD command is ignored when the current font is a scalable font. Font Mode Values Font mode 0 1 2 3 4 5 6 7 8 9 10 Character spacing Yes Yes Yes Yes Yes Automatic changes Line Fixed or spacing proportional Yes Yes Yes Yes Yes Yes Yes Yes Yes Portrait or landscape Yes Yes Yes 119