Kyocera KM-6030 PRESCRIBE Commands Command Reference Manual Rev 4.8 - Page 164

PRESCRIBE Command Reference Function The LDFN S command allows outline fonts (TrueType fonts) to be downloaded to the printing system. A binary format is used to represent font data. The size of this data must match that given by length (font data length). Always explicitly terminate font data using WRED;. The five bytes represented by WRED; are not counted as part of the font data length. The maximum number of fonts that can be downloaded is up to the memory available or 256 fonts (512 when format is 2). Use FONT or SFNT command to select 1-byte fonts to be defined with this command. TrueType fonts defined using this command cannot be completely deleted unless both DELF n; and DELF n+1; are specified. A command error will result and the command has no effect if any of the parameters are outside the given range. This command is ignored if even one parameter error occurs. Although symbol-set, style, stroke and type-face may be omitted, we recommend that all parameters be used to define font selection information. 154