Kyocera KM-6030 PRESCRIBE Commands Command Reference Manual Rev 4.8 - Page 233

RGBL RGBL - control RGB Level COLOR Format RGBL color, level; Parameters color: 0 = red 1 = green 2 = blue level: number from -10 to 10 (Default = 0) Function The RGBL command controls balance for each level of RGB. It individually corrects the gamma for each color. The color bars below represent color balance variations for each of RGB. The top bar represents the default saturation variation. The output result for an input value is maintained in linear form. The middle color bar is an example showing an increase in output for the input value. Indicates γ > 1.0 when being equivalent to the gamma curve. The bottom color bar is an example showing a decrease in output for the input value. Indicates γ < 1.0 when being equivalent to the gamma curve. Default color balance (R) Color balance increased Color balance decreased Default color balance (G) Color balance increased Color balance decreased Default color balance (B) Color balance increased Color balance decreased Varying color balance allows the output image results to vary. Issuing this command resets hue, saturation, and luminosity control values to their default settings. 223