Kyocera KM-6030 PRESCRIBE Commands Command Reference Manual Rev 4.8 - Page 37

APSG APSG - Assign Paper Source Group Format APSG group # (cassette 1), group # (cassette 2), ...group # (cassette 6); Parameters group #: Number representing the group to which the cassette is grouped, from the top (1) towards the bottom (6) cassette, as the following numbers: 0 = Ungroup the cassette 1 = Assign the cassette for group 1 2 = Assign the cassette for group 2 3 = Assign the cassette for group 3 Function The APSG command assigns the paper cassettes with group numbers, between 1 through 3, so that the grouped cassettes behave as a single paper source for bulk printing. The MP tray cannot be assigned to a group. All 6 parameters must be given even though the printer has less than 6 cassettes installed. For missing cassette numbers, specify 0. The printing system will automatically switch between the paper cassettes in the group when a cassette becomes empty. When a group contains paper of different paper sizes and types, printing will continue for the different paper sizes and types. If the automatic paper selection feature of the printer driver is used, APSG is disabled. To utilize paper source grouping, the paper source must be explicitly commanded by the printer driver. Example To set six paper cassettes into group 1 (cassettes 1 and 4), group 2 (cassettes 2 and 5), and group 3 (cassettes 3 and 6), respectively: !R! APSG 1,2,3,1,2,3; EXIT; In this example, when cassette 1 becomes empty, printing will continue using cassette 4 which is the other part of group 1. The APSG sequence is valid after the printing system is switched off. To upgroup paper cassettes, use parameter 0 as the following example: !R! APSG 1,0,0,1,0,0; EXIT; Paper cassettes of 2 and 5, and 3 and 6 are ungrouped, keeping paper cassettes 1 and 3 (group 1) intact. 27