Kyocera KM-6030 PRESCRIBE Commands Command Reference Manual Rev 4.8 - Page 162

PRESCRIBE Command Reference type: font type: 0 = character codes from 32 to 127 1 = character codes from 32 to 127 and from 160 to 255 2 = character codes from 0 to 255 Function The LDFN F command creates a font header for downloading a font to the printer. After the header is created, you must continue with downloading bitmap characters using the LDFN C command. This command only generates a font information header; it includes no character definition information. Since the font header defined by this command is capable of registering extensions to ANK codes (a 1-byte code), it is necessary to select a font after assigning fonts using the ASFN command when using 2-byte characters. Refer to the ASFN command page for details. This command is recommended for use with downloading bitmap fonts. This command is intended as an equivalent for the old LDFC, LDKC and CRKF commands to create a new bitmap font. LDFC, LDKC and CRKF will be discontinued in the future. Font Select Command FONT, SFNT KFNT, SKFT Description European character (1-byte code) emulation Japanese character (2-byte code) emulation (linked using ASFN) A command error will result and the command has no effect if any of the parameters are outside the given range. This command is ignored if even one parameter error occurs. 152