Kyocera KM-6030 PRESCRIBE Commands Command Reference Manual Rev 4.8 - Page 344

PRESCRIBE Command Reference SSTK - select Sorter STacKer Format SSTK [tray, tray, ...]; or SSTK 0; Parameter tray: number from 1 to the maximum (bottom) Function The SSTK command is effective only when the optional sorter is installed to the printing system. It instructs the printing system to deliver printed pages in the sorter mode. Each specified tray receives a complete set of pages, one copy of each. If the parameters are omitted, the top n trays are used, where n is the copy count (equal or less than the number of trays). If you specify the copy count which is greater than the number of the trays being selected, the bulk tray receives the overflowed pages. If the tray parameters are specified, the COPY command is unnecessary as the printing system automatically makes the copy count to be the same as the number of the tray parameters specified. Upon receiving the SSTK command, the printing system automatically performs a page feed. If the parameter is 0 for SSTK (SSTK 0;) this command disables sorting and delivers all pages to the bulk output tray. This command is irrelevant to certain combination of photocopier models and option finisher models. Note File !R! RES; SSTK 1, 3, 5; EXIT; Three copies of this file will be printed. The output goes to sorter trays 1, 3, and 5. !R! PAGE; EXIT; If the tray parameters were omitted (SSTK; COPY3;), sorter trays 1, 2, and 3 would be used. !R! PAGE; EXIT; 334