Kyocera KM-6030 PRESCRIBE Commands Command Reference Manual Rev 4.8 - Page 251

RVRD The following examples produce invalid raster data lines: Wrong: 0,; Count cannot be 0. 1; Use 1,; for a blank line. 2, 1, 1, 1; Too many data values. 2, -1, -1; Negative values are not allowed. 2, 1 , 1; Carriage return before comma. An invalid raster data line is not printed, and invalidates all raster lines that follow. Again, the following example demonstrates how to create the raster graphic on the previous page. !R! STR 75; RVRD; 2;A|0; 2;GG0; 2;^S; 2;˜{>>; 2;^S; 2;GG0; 2;A|0; ENDR; PAGE; EXIT; The value 2 in each raster data line indicates the number of data which follows. The subsequent data can be obtained by following the same procedure as explained in Defining Fill Patterns in Chapter 2 of the Technical Reference manual. 241